Examples
The following example shows how to enable brief debugging for received packets:
RP/0/RSP0/CPU0:router#debug spanning-tree mst packet brief received
Mon Nov 15 20:42:58.584 PST
The following example shows how to enable brief debugging for received packets at a specific location:
RP/0/RSP0/CPU0:router#debug spanning-tree mst packet brief received location 0/0/CPU0
Mon Nov 15 20:44:15.082 PST
The following example shows how to enable brief debugging for received packets on a specific interface:
RP/0/RSP0/CPU0:router#debug spanning-tree mst packet brief received interface gigabitEthernet
0/0/0/1
Mon Nov 15 20:45:40.047 PST
Related Commands
DescriptionCommand
Enables debugging protocol-state changes such as port role or
state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Enables debugging raw packet output for all received packets
or sent packets.
debug spanning-tree packet raw, on page 485
Enters the MSTP configuration submodespanning-tree mst, on page 623
Displays the multiple spanning tree protocol status information.show spanning-tree mst, on page 589
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
480
Multiple Spanning Tree Protocol Commands
debug spanning-tree mst packet
To Next Page
Loading...
