Cisco ASR 9000 Series - Page 52

Examples
This example shows how to set the ipv6 address for a tunnel interface:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#interface tunnel-ip 67 ipv6 address 10:2::3 link-local
route-tag 78
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
38
Generic Routing Encapsulation Commands
ipv6 address (LxVPN)