Examples
The following sample output is from the show l2vpn mstp vlan command:
RP/0/RSP0/CPU0:router# show l2vpn mstp vlan interface gigabitethernet 0/1/0/0 msti 5 vlan-id
5
Related Commands
DescriptionCommand
Enters the MSTP configuration submodespanning-tree mst, on page 623
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
spanning-tree pvrstag, on page 629
Enters the Per VLAN Spanning Tree Access Gateway
(PVSTAG) configuration submode.
spanning-tree pvstag, on page 631
Enters the MSTP configuration submodespanning-tree mst, on page 623
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Displays the internal MSTI number and number of ports for
each VLAN.
show l2vpn mstp port, on page 585
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
588
Multiple Spanning Tree Protocol Commands
show l2vpn mstp vlan
To Next Page
Loading...
