Cisco ASR 9000 Series - Page 648

DescriptionCommand
Enter the MSTAG interface configuration submode, and enables
MSTAG for the specified port.
interface (MSTAG/REPAG), on page 523
Enters MSTAG Instance configuration mode or REPAG Instance
configuration mode.
instance (MSTAG/REPAG), on page 515
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree repag, on page 617
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
634
Multiple Spanning Tree Protocol Commands
spanning-tree repag