Cisco ASR 9000 Series Reference Guide

Examples
The following example show how to apply filters on packets inbound and outbound from GigabitEthernet
interface 0/2/0/0:
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/2/0/2
RP/0/RSP0/CPU0:router(config-if)# ethernet-service access-group p-ingress-filter ingress
RP/0/RSP0/CPU0:router(config-if)# ethernet-service access-group p-egress-filter egress
Related Commands
DescriptionCommand
Creates a copy of an existing Ethernet services access list.copy access-list ethernet-service, on page 648
Sets conditions for an Ethernet services access listdeny (ES ACL), on page 650
Defines an Ethernet services (Layer 2) access list by name.ethernet-services access-list, on page 655
Sets conditions for an Ethernet services access list.permit (ES ACL), on page 657
Renumbers existing statements and increment subsequent
statements to allow a new Ethernet services access list
statement.
resequence access-list ethernet-service, on page
660
Displays the contents of current Ethernet services access
lists.
show access-lists ethernet-services, on page 662
Displays Ethernet services access list trace information.show access-lists ethernet-services trace, on
page 666
Identifies the modes and interfaces on which a particular
ACL is applied.
show access-list ethernet-service usage pfilter,
on page 668
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
654
Layer 2 Access List Commands
ethernet-service access-group

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model