Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Examples

This example shows how to enable dynamic ARP inspection on bridge bar:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# l2vpn

RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group b1

RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# dynamic-arp-inspection

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-dai)#

This example shows how to enable dynamic ARP inspection logging on bridge bar:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# l2vpn

RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group b1

RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# dynamic-arp-inspection logging

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-dai)#

This example shows how to enable dynamic ARP inspection address validation on bridge bar:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# l2vpn

RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group b1

RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# dynamic-arp-inspection address-validation

RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-dai)#

Related Commands

DescriptionCommand

Establishes a bridge domain, and enters L2VPN bridge group bridge

domain configuration mode.

bridge-domain (VPLS), on page 240

Creates a bridge group so that it can contain bridge domains and

then to assign network interfaces to the bridge domain.

bridge group (VPLS), on page 242

Enters L2VPN configuration mode.l2vpn, on page 100

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x

Point to Point Layer 2 Services Commands

dynamic-arp-inspection

Cisco ASR 9000 Series Reference Guide

Other manuals for Cisco ASR 9000 Series