Cisco Small Business RV220W Administration Guide

Installing the Cisco RV220W
Mounting the Cisco RV220W
Cisco RV220W Administration Guide 212
A
The dimensions for these parts are as follows:
WARNING Insecure mounting might damage the device or cause injury. Cisco is not
responsible for damages incurred by insecure wall-mounting.
To mount the RV220W to the wall:
STEP 1 Determine where you want to mount the RV220W. Verify that the surface is
smooth, flat, dry, and sturdy. Take into account the dimensions of the RV220W and
allow for 3 inches (76.2 mm) of clearance around it.
STEP 2 For horizontal mounting, drill two pilot holes into the surface 5-7/8 inches (150 mm)
apart. For vertical mounting, drill two pilot holes into the surface 4-1/4 inches
(108 mm) apart.
STEP 3 (Optional) If using drywall anchors, hammer into holes.
1 0.30 to 0.32 in
7.7 to 8.2 mm
2 0.86 to 0.88 in
21.8 to 22.3
mm
3 0.26 to 0.28 in
6.5 to 7.1 mm
4 0.61 to 0.63 in
15.5 to 16 mm
1
2
4
3
196243
RV220W
Wireless N Network Security Firewall
279937
Horizontal
W
all mount
slots
5-7/8"
Vertical
Wall moun
t
slots
4-1/4"

Cisco Small Business RV220W Specifications

General

Firewall Type	Stateful packet inspection (SPI)
VPN Support	Yes
DHCP Server	Yes
QoS	Yes
Wireless Speed	300 Mbps
Management	Web-based
LAN Ports	4
Encryption	AES
Security Features	NAT, URL filtering
Power Supply	12V DC
Wireless Standard	802.11n
WAN Ports	1