GVRP Commands
Page 100
gvrp vlan-creation-forbid
The gvrp vlan-creation-forbid Interface Configuration (Ethernet, port-channel) mode command disables
dynamic VLAN creation or modification. To enable dynamic VLAN creation or modification, use the no form of this
command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
Dynamic VLAN creation or modification is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command forbids dynamic VLAN creation from the interface. The creation or modification of dynamic VLAN
registration entries as a result of the GVRP exchanges on an interface are restricted only to those VLANs for
which static VLAN registration exists.
Example
The following example disables dynamic VLAN creation on Ethernet port 6.
Console(config)#
interface ethernet
6
Console(config-if)#
gvrp vlan-creation-forbid
To Next Page
Loading...
