VLAN Commands
Page 292
private-vlan isolated
The private-vlan isolated Interface Configuration mode command configures the isolated VLAN of the PVLAN.
To return to the default configuration, use the no form of this command.
Syntax
private-vlan isolated vlan-id
no private-vlan isolated
• vlan-id — Specifies the ID of the isolated VLAN.
Default Configuration
No VLAN is configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
•
This command creates an isolated VLAN and associates it with the primary VLAN.
• The command is executed in the context of the primary VLAN.
• An isolated VLAN can only be associated with one primary VLAN.
• A VLAN that has been configured as an isolated VLAN cannot be configured as a primary or community
VLAN.
• The command is not supported under the command interface range vlan.
Example
This example configures VLAN 20 as the isolated VLAN of primary private VLAN 200.
Console#
config
Console(config)#
vlan database
Console(config-vlan)#
vlan
200
Console(config-vlan)#
exit
Console(config)#
interface vlan
200
Console(config-if)#
private-vlan primary
Console(config-if)#
private-vlan isolated
20
To Next Page
Loading...
Need help?
General