Management ACL
Page 146
management access-class
The management access-class Global Configuration mode command restricts management connections by
defining the active management access list. To disable this restriction, use the no form of this command.
Syntax
management access-class {console-only | name}
no management access-class
Parameters
•
console-only — Indicates that the device can be managed only from the console.
• name — Specifies the name of the access list to be used. (Range: 1-32 characters)
Default Configuration
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access list called mlist as the management access list.
Console(config)#
management access-class
mlist
To Next Page
Loading...
Need help?
General