Ethernet Configuration Commands
Page 84
show interfaces advertise
The show interfaces advertise Privileged EXEC mode command displays autonegotiation data.
Syntax
show interfaces advertise [ethernet interface | port-channel port-channel-number ]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
• port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following examples display autonegotiation information.
Console#
show interfaces advertise
Port Type Neg Operational Link Advertisement
---- ----------- ------- ------------------------------
1 100M-Copper Enabled --
2 100M-Copper Enabled --
3 100M-Copper Enabled --
4 100M-Copper Enabled --
5 100M-Copper Enabled 100f, 100h, 10f, 10h
6 100M-Copper Enabled --
7 100M-Copper Enabled --
8 100M-Copper Enabled --
9 1G-Copper Enabled
19 1G-Fiber Enabled
Port Type Neg Operational Link Advertisement
---- ----------- ------- ------------------------------
ch1 Enabled
ch2 Enabled
To Next Page
Loading...
