IP Addressing Commands
Page 122
ip domain-name
The ip domain-name Global Configuration mode command defines a default domain name used by the software
to complete unqualified host names (names without a dotted-decimal domain name). To remove the default
domain name, use the no form of this command.
Syntax
ip domain-name name
no ip domain-name
Parameters
•
name — Specifies the default domain name used to complete unqualified host names. Do not include the ini-
tial period that separates an unqualified name from the domain name. (Range: 1-158 characters)
Default Configuration
A default domain name is not defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
