D-Link DES-3010GA - Show Bridge Address-Table

D-Link DES-3010FA/GA CLI Reference Guide
Page 39
show bridge address-table
Use the show bridge address-table Privileged EXEC command to view entries in the bridge-forwarding data-
base.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number] ] [address mac-
address]
Parameters
•
vlan — Specific VLAN, such as VLAN 1.
• interface — Ethernet port.
• port-channel-number — Port-channel number.
• mac-address— MAC address.
Parameters Range
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on routed ports) are presented in the VLAN column
by a port number and not by a VLAN ID.
Example
Console# show bridge address-table
Aging time is 300 sec
vlan mac address Port Type
--------- -------------- ---- -------
3 00:00:00:55:55:66 3 dynamic
3 00:03:47:cc:01:ce 3 dynamic
3 00:06:1b:c9:6f:c5 3 dynamic
3 00:11:11:6b:3a:32 3 dynamic
3 00:80:92:0b:80:80 3 dynamic