D-Link DES-3010FA/GA CLI Reference Guide
Page 153
Section 14.Port Channel Commands
interface port-channel
The interface port-channel Global Configuration mode command enters the interface configuration mode to con-
figure a specific port-channel.
Syntax
interface port-channel port-channel-number
Parameters
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Six aggregated links can be defined, each can have up to eight member ports per port-channel. The aggregated
links’ valid IDs are 1-8.
Example
The following example enters the context of port-channel number 1.
Console(config)#
interface port-channel
1