D-Link DES-3010GA - Show Snmp Filters

D-Link DES-3010FA/GA CLI Reference Guide
Page 219
show snmp filters
The show snmp filters Privileged EXEC mode command displays the configuration of filters.
Syntax
show snmp filters [filtername]
Parameters
•
filtername—Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of filters.
Console# show snmp filters
Name OID Tree Type
----------- ----------------------- ---------
user-filter 1.3.6.1.2.1.1 Included
user-filter 1.3.6.1.2.1.1.7 Excluded
user-filter 1.3.6.1.2.1.2.2.1.*.1 Included