D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 217
show snmp groups
The show snmp groups Privileged EXEC mode command displays the configuration of groups.
Syntax
show snmp groups [groupname]
Parameters
•
groupname—Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
The following table describes significant fields shown above.
Console# show snmp groups
Name Security Views
Model Level Read Write Notify
-------------- ----- ----- ------- ------- -------
user-group V3 priv Default "" ""
managers-group V3 priv Default Default ""
managers-group V3 priv Default "" ""
Field Description
Name Name of the group.
Security Model SNMP model in use (v1, v2 or v3).
Security Level Authentication of a packet with encryption. Applicable only to the SNMP v3
security model.
Views Read Name of the view that enables only viewing the contents of the agent. If
unspecified, all objects except the community-table and SNMPv3 user and
access tables are available.

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English