D-Link DES-3010GA - Show Snmp Engineid

D-Link DES-3010FA/GA CLI Reference Guide
Page 215
show snmp engineid
The show snmp engineID Privileged EXEC mode command displays the ID of the local Simple Network Man-
agement Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
Console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878