D-Link DES-3010GA - speed

Line Commands
Page 134
Section 11. Line Commands
line
The line Global Configuration mode command identifies a specific line for configuration and enters the Line Con-
figuration command mode.
Syntax
line {console | telnet | ssh}
Parameters
•
console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures the device as a virtual terminal for remote console access.
Console(config)# line telnet
Console(config-line)#