D-Link DES-3010GA User Manual

QoS Commands
Page 162
priority-queue out num-of-queues
The priority-queue out num-of-queues Global Configuration mode command configures the number of expedite
queues. To return to the default configuration, use the no form of this command.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
Parameters
•
number-of-queues — Specifies the number of expedite queues. The expedite queues would be the queues
with higher indexes. (Range: 0-3)
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
When the specified number of expedite queues is 0, no SP is used and weights are defined as 1, 2, 4 and 8.
When the specified number of expedite queues is 4, the Strict Priority scheduling method is used.
Example
The following example configures the number of expedite queues as 0.
Console(config)# priority-queue out num-of-queues 0

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English