D-Link DES-3010GA User Manual

IGMP Snooping Commands
Page 112
show ip igmp snooping interface
The show ip igmp snooping interface User EXEC mode command displays IGMP snooping configuration.
Syntax
show ip igmp snooping interface vlan-id
Parameters
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays IGMP snooping information on VLAN 1000.
Console> show ip igmp snooping interface 1000
IGMP Snooping is globaly enabled
IGMP Snooping is enabled on VLAN 1000
IGMP host timeout is 300 sec
IGMP Immediate leave is disabled. IGMP leave timeout is 10 sec
IGMP mrouter timeout is 200 sec
Automatic learning of multicast router ports is enabled

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English