D-Link DES-3010FA/GA CLI Reference Guide
Page 97
Section 7. GVRP Commands
gvrp enable (Global)
GARP VLAN Registration Protocol (GVRP) is an industry-standard protocol designed to propagate VLAN informa-
tion from device to device. With GVRP, a single device is manually configured with all desired VLANs for the net-
work, and all other devices on the network learn these VLANs dynamically.
The gvrp enable Global Configuration mode command enables GVRP globally. To disable GVRP on the device,
use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables GVRP globally on the device.
Console(config)#
gvrp enable
To Next Page
Loading...
