D-Link DES-3010GA - private-vlan isolated

D-Link DES-3010FA/GA CLI Reference Guide
Page 291
private-vlan primary
The private-vlan primary Interface Configuration mode command configures the primary PVLAN. To return to the
default configuration, use the no form of this command.
Syntax
private-vlan primary
no private-vlan primary
Default Configuration
No PVLANs are configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
•
An IP interface cannot be defined on a primary VLAN.
• A primary VLAN cannot be defined if an IP interface has been configured on it.
• The command is not supported under the command interface range vlan.
Example
This example configures VLAN 200 as the primary private VLAN.
Console# config
Console(config)# vlan database
Console(config-vlan)# vlan 200
Console(config-vlan)#
exit
Console(config)# interface vlan 200
Console(config-if)#
private-vlan primary