Web Server
Page 314
ip http port
The ip http port Global Configuration mode command specifies the TCP port to be used by the Web browser
interface. To return to the default configuration, use the no form of this command.
Syntax
ip http port port-number
no ip http port
Parameters
•
port-number — Port number for use by the HTTP server. (Range: 0 - 65535)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
Specifying 0 as the port number effectively disables HTTP access to the device.
Example
The following example configures the http port number to 100.
Console(config)# ip http port 100
To Next Page
Loading...
Need help?
General