D-Link DES-3010GA - Show Users

D-Link DES-3010FA/GA CLI Reference Guide
Page 271
show users
The show users User EXEC mode command displays information about the active users.
Syntax
show users
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
Console> show users
Username Protocol Location
---------- ----------- ------------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7