D-Link DES-3010GA - show ip interface

IP Addressing Commands
Page 116
ip default-gateway
The ip default-gateway Global Configuration mode command defines a default gateway (router). To return to the
default configuration, use the no form of this command.
Syntax
ip default-gateway ip-address
no ip default-gateway
Parameters
•
ip-address — Valid IP address of the default gateway.
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines default gateway 192.168.1.1.
Console(config)# ip default-gateway 192.168.1.1