D-Link DES-3010GA - Show Dot1 X Statistics

D-Link DES-3010FA/GA CLI Reference Guide
Page 333
show dot1x statistics
The show dot1x statistics Privileged EXEC mode command displays 802.1X statistics for the specified interface.
Syntax
show dot1x statistics ethernet interface
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1X statistics for the specified interface.
Console# show dot1x statistics ethernet 1
EapolFramesRx: 11
EapolFramesTx: 12
EapolStartFramesRx: 12
EapolLogoffFramesRx: 1
EapolRespIdFramesRx: 3
EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 00:08:78:32:98:78