D-Link DES-3010GA - Line Commands; line

D-Link DES-3010FA/GA CLI Reference Guide
Page 133
show lacp port-channel
The show lacp port-channel Privileged EXEC mode command displays LACP information for a port-channel.
Syntax
show lacp port-channel [port_channel_number]
Parameters
•
port_channel_number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays LACP information about port-channel 1.
Console# show lacp port-channel 1
Port-Channel 1: Port Type 1000 Ethernet
Actor
System Priority: 1
MAC Address: 00:02:85:0E:1C:00
Admin Key: 29
Oper Key: 29
Partner
System Priority: 0
MAC Address: 00:00:00:00:00:00
Oper Key: 14