Port Monitor Commands
Page 158
port monitor vlan-tagging
The port monitor Interface Configuration (Ethernet) mode command transmits tagged ingress mirrored packets.
To transmit untagged ingress mirrored packets, use the no form of this command.
Syntax
port monitor vlan-tagging
no port monitor vlan-tagging
Default Configuration
Ingress mirrored packets are transmitted untagged.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures all ingress mirrored packets from port 9 to be transmitted as tagged packets.
Console (config)#
interface ethernet
9
Console (config-if)#
port monitor vlan-tagging
To Next Page
Loading...
