802.1x Commands
Page 318
dot1x system-auth-control
The dot1x system-auth-control Global Configuration mode command enables 802.1x globally. To return to the
default configuration, use the no form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
802.1x is disabled globally.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally.
Console(config)#
dot1x system-auth-control
To Next Page
Loading...
Need help?
General