D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 247
show spanning-tree
The show spanning-tree Privileged EXEC mode command displays spanning-tree configuration.
Syntax
show spanning-tree [ethernet interface -number| port-channel port-channel-number] [instance instance-id]
show spanning-tree [detail] [active | blockedports] [instance instance-id]
show spanning-tree mst-configuration
Parameters
•
interface -number— A valid Ethernet port.
• port-channel-number — A valid port channel number.
• detail — Indicates detailed information.
• active — Indicates active ports only.
• blockedports — Indicates blocked ports only.
• mst-configuration— Indicates the MST configuration identifier.
• instance-id—Specifies ID of the spanning tree instance.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays spanning-tree information.

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English