D-Link DES-3010GA - SNMP Commands; snmp-server community

RMON Commands
Page 196
rmon table-size
The rmon table-size Global Configuration mode command configures the maximum size of RMON tables. To
return to the default configuration, use the no form of this command.
Syntax
rmon table-size {history entries | log entries}
no rmon table-size {history | log}
Parameters
•
history entries — Maximum number of history table entries. (Range: 20 -32767)
• log entries — Maximum number of log table entries. (Range: 20-32767)
Default Configuration
History table size is 270.
Log table size is 200.
Command Mode
Global Configuration mode
User Guidelines
The configured table size taskes effect after the device is rebooted.
Example
The following example configures the maximum RMON history table sizes to 100 entries.
Console(config)# rmon table-size history 100