VLAN Commands
Page 288
interface vlan
The interface vlan Global Configuration mode command enters the Interface Configuration (VLAN) mode.
Syntax
interface vlan vlan-id
Parameters
•
vlan-id — Specifies an existing VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures VLAN 1 with IP address 131.108.1.27 and subnet mask 255.255.255.0.
Console(config)# interface vlan 1
Console(config-if)#
ip address
131.108.1.27 255.255.255.0
To Next Page
Loading...
Need help?
General