D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 213
show snmp
The show snmp Privileged EXEC mode command displays the SNMP status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP communications status.
Console# show snmp
Community-
String
Community-
Access
View name IP
address
---------- ---------- --------- --------
public read only user-view All
private read write Default 172.16.1.1
private su DefaultSuper 172.17.1.1
Community-string Group name IP address
---------------- ---------- ----------
public user-group all
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP
Port
Filter
Name
TO
Sec
Retries
-------------- ----- --------- ------- ---- ------ --- -------
192.122.173.42 Trap public 2 162 15 3
192.122.173.42 Inform public 2 162 15 3

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English