D-Link DES-3010GA User Manual

SNMP Commands
Page 210
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact (sysContact)
string. To remove system contact information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
•
text — Specifies the string that describes system contact information. (Range: 0-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Examples
The following example configures the system contact as “administrator”.
Console(config)# snmp-server contact administrator

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English