VLAN Commands
Page 290
name
The name Interface Configuration mode command adds a name to a VLAN. To remove the VLAN name, use the
no form of this command.
Syntax
name string
no name
Parameters
•
string — Unique name to be associated with this VLAN. (Range: 1-32 characters)
Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode. Cannot be configured for a range of interfaces (range context).
User Guidelines
There are no user guidelines for this command.
Example
The following example gives VLAN number 19 the name Marketing.
Console(config)# interface vlan 19
Console(config-if)# name Marketing
To Next Page
Loading...
Need help?
General