D-Link DES-3010FA/GA CLI Reference Guide
Page 121
show arp
The show arp Privileged EXEC mode command displays entries in the ARP table.
Syntax
show arp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays entries in the ARP table.
Console#
show arp
ARP timeout: 80000 Seconds
Interface IP address HW address Status
--------- ---------- ----------------- -------
1 10.7.1.102 00:10:B5:04:DB:4B Dynamic
2 10.7.1.135 00:50:22:00:2A:A4 Static
To Next Page
Loading...
