D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 317
Section 26.802.1x Commands
aaa authentication dot1x
The aaa authentication dot1x Global Configuration mode command specifies one or more authentication, autho-
rization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. To return to the default config-
uration, use the no form of this command.
Syntax
aaa authentication dot1x default method1 [method2...]
no aaa authentication dot1x default
Parameters
•
method1 [method2...] — At least one from the following table:
Default Configuration
No authentication method is defined.
Command Mode
Global Configuration mode
User Guidelines
Additional methods of authentication are used only if the previous method returns an error and not if the request
for authentication is denied. To ensure that authentication succeeds even if all methods return an error, specify
none as the final method in the command line.
The RADIUS server must support MD-5 challenge and EAP type frames.
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
Keyword Description
Radius Uses the list of all RADIUS servers for authentication
None Uses no authentication
Console(config)# aaa authentication dot1x default none

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English