D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 179
radius-server deadtime
The radius-server deadtime Global Configuration mode command improves RADIUS response time when serv-
ers are unavailable. The command is used to cause the unavailable servers to be skipped. To return to the default
configuration, use the no form of this command.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
•
deadtime — Length of time in minutes during which a RADIUS server is skipped over by transaction
requests. (Range: 0 - 2000)
Default Configuration
The deadtime setting is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the deadtime to 10 minutes.
Console(config)# radius-server deadtime 10

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English