D-Link DES-3010GA User Manual

802.1x Commands
Page 340
show dot1x advanced
The show dot1x advanced Privileged EXEC mode command displays 802.1X advanced features for the device
or specified interface.
Syntax
show dot1x advanced [ethernet interface]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1X advanced features for the device.
Console# show dot1x advanced
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface Multiple Hosts Guest VLAN
--------- -------------- ----------
1 Disabled Enabled
2 Enabled Disabled
Console#
show dot1x advanced ethernet 1
Interface Multiple Hosts Guest VLAN
--------- -------------- ----------
1 Disabled Enabled
Single host parameters
Violation action: Discard
Trap: Enabled

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English