D-Link DES-3010GA User Manual

Spanning-Tree Commands
Page 246
abort (mst)
The abort MST Configuration mode command exits the MST configuration mode without applying the configura-
tion changes.
Syntax
abort
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
Console(config) # spanning-tree mst configuration
Console(config-mst) # abort

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English