D-Link DES-3010GA User Manual

VLAN Commands
Page 308
show vlan internal usage
The show vlan internal usage Privileged EXEC mode command displays a list of VLANs used internally by the
device.
Syntax
show vlan internal usage
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays VLANs used internally by the device.
Console# show vlan internal usage
VLAN Usage IP address Reserved
---- --------- ---------- --------
1007 Eth 3 Active No
1008 Eth 4 Inactive Yes
1009 Eth 3 Active Yes

D-Link DES-3010GA Specifications

General

Type	Managed
Layer	Layer 2
Switching Capacity	20 Gbps
MAC Address Table	8K
Power Supply	Internal
RAM	128 MB
Flash Memory	16 MB
Jumbo Frame Support	Yes
VLAN Support	Yes
Humidity	10% to 90% non-condensing
Ports	8 x 10/100/1000Base-T
Jumbo Frame Size	9KB
Operating Temperature	0°C to 40°C