D-Link DES-3010GA - Show Ip Igmp Snooping Mrouter

D-Link DES-3010FA/GA CLI Reference Guide
Page 111
show ip igmp snooping mrouter
The show ip igmp snooping mrouter User EXEC mode command displays information on dynamically learned
multicast router interfaces.
Syntax
show ip igmp snooping mrouter [interface vlan-id]
Parameters
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays multicast router interfaces in VLAN 1000.
Console> show ip igmp snooping mrouter interface 1000
VLAN Ports
---- -----
1000 1
Detected multicast routers that are forbidden statically:
VLAN Ports
---- -----
1000 9