D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 339
dot1x guest-vlan enable
The dot1x vlans guest-vlan enable Interface Configuration mode command enables unauthorized users on the
interface access to the Guest VLAN. To disable access, use the no form of this command
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Default Configuration
Disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
A device can have only one global guest VLAN. The guest VLAN is defined using the dot1x guest-vlan Interface
Configuration mode command.
Example
The following example enables unauthorized users on Ethernet port 1 to access the guest VLAN.
Console# configure
Console(config)# interface ethernet 1
Console(config-if)#
dot1x guest-vlan enable

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English