D-Link DES-3010GA User Manual

D-Link DES-3010FA/GA CLI Reference Guide
Page 205
snmp-server enable traps
The snmp-server enable traps Global Configuration mode command enables the device to send SNMP traps. To
disable SNMP traps, use the no form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Default Configuration
SNMP traps are enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables SNMP traps.
Console(config)# snmp-server enable traps

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English