D-Link DES-3010GA User Manual

QoS Commands
Page 168
qos map dscp-queue
The qos map dscp-queue Global Configuration mode command modifies the DSCP to CoS map. To return to the
default map, use the no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue [dscp-list]
Parameters
•
dscp-list — Specifies up to 8 DSCP values separated by a space. (Range: 0 - 63)
• queue-id — Specifies the queue number to which the DSCP values are mapped.
Default Configuration
The following table describes the default map.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
DSCP value 0-15 16-39 40-63
Queue-ID 1 2 3
Console(config)# qos map dscp-queue 33 40 41 to 1

D-Link DES-3010GA Specifications

General

Brand	D-Link
Model	DES-3010GA
Category	Switch
Language	English