RMON Commands
Page 190
show rmon alarm
The show rmon alarm User EXEC mode command displays alarm configuration.
Syntax
show rmon alarm number
Parameters
•
number — Specifies the alarm index. (Range: 1 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays RMON 1 alarms.
The following table describes the significant fields shown in the display:
Console> show rmon alarm 1
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
Field Description
Alarm Alarm index.
OID Monitored variable OID.
Last Sample Value The statistic value during the last sampling period. For example, if the sample type is
delta, this value is the difference between the samples at the beginning and end of the
period. If the sample type is absolute, this value is the sampled value at the end of the
period.
To Next Page
Loading...
Need help?
General