D-Link DES-3010FA/GA CLI Reference Guide
Page 191
Interval The interval in seconds over which the data is sampled and compared with the rising
and falling thresholds.
Sample Type The method of sampling the variable and calculating the value compared against the
thresholds. If the value is absolute, the value of the variable is compared directly with
the thresholds at the end of the sampling interval. If the value is delta, the value of the
variable at the last sample is subtracted from the current value, and the difference com-
pared with the thresholds.
Startup Alarm The alarm that may be sent when this entry is first set. If the first sample is greater than
or equal to the rising threshold, and startup alarm is equal to rising or rising and falling,
then a single rising alarm is generated. If the first sample is less than or equal to the fall-
ing threshold, and startup alarm is equal falling or rising and falling, then a single falling
alarm is generated.
Rising Threshold A sampled statistic threshold. When the current sampled value is greater than or equal
to this threshold, and the value at the last sampling interval is less than this threshold, a
single event is generated.
Falling Threshold A sampled statistic threshold. When the current sampled value is less than or equal to
this threshold, and the value at the last sampling interval is greater than this threshold, a
single event is generated.
Rising Event The event index used when a rising threshold is crossed.
Falling Event The event index used when a falling threshold is crossed.
Owner The entity that configured this entry.
To Next Page
Loading...
Need help?
General