xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
124
o view the following window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Multicast
Profile Settings, as shown below:
T
cast Profile Settings window
The fields that can be configure d below:
Figure 4-75 IPv4 Multi
d are describe
Parameter Description
Profile ID
Enter a profile ID between 1 and 24.
Profile Name
Enter a name for the IP Multicast Profile.
Click the Add button to add a new entry based on the information entered.
d.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries liste
Click the Group List
link to configure the multicast address group list settings for the specific entry.
lick the Edit button to re-configure the specific entry.
After clicking the Group List
C
Click the Delete button to remove the specific entry.
link, the following page will appear:
ress Group List Settings window
The fields that can be configured are described below:
Figure 4-76 Multicast Add
Parameter Description
Profile ID
Display the profile ID.
Profile Name
Display the profile name.
Multicast Address List
Enter the multicast address list here.
Click the Add button to add a new entry based on the information entered.
and return to the previous page.
lick the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the <<Back button to discard the changes made
C
To Next Page
Loading...
