xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
Figure 10-17 Ethernet OAM Statistics window
The fields that can be configured are described below:
Parameter Description
Port
Use the drop-down menu to specify the port number.
Port List
Specify which ports’ counter to show. Tick All Ports to view all ports.
Click the Clear button to clear all the information entered in the fields.
DULD Settings
The window is used to configure unidirectional link detection on ports.
Unidirectional link detection provides discovery mechanism based on 802.3ah to find its neighbor. If the discovery can
complete in the configured discovery time, it concludes the bi-directional link. Otherwise, it starts to detect the link
status.
To view this window, click OAM > DULD Settings, as shown below:
306
To Next Page
Loading...
