D-Link DES-3528 - xStack Switch - Stackable - CFM Port Settings

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
CFM Port Settings
This table is used to enable or disable the connectivity fault management function on a per port basis. CFM is disabled
on all ports by default.
To view this window, click OAM > CFM > CFM Port Settings, as shown below:
Figure 10-8 CFM Port Settings window
The fields that can be configured are described below:
Parameter Description
Unit
Select the unit to configure.
From Port / To Port
Use the drop-down menus to select a port or range of ports to configure.
State
Use the drop-down menu to enable or disable the function.
Click the Apply button to implement the changes made.
298